ICOM IC-R8600 SSB/AM/FM/WFM/CW Desktop Wideband Radio Receiver BOX
- Item condition:
- Time left:
- $2,700.00 Buy It Now
- Item location:
- Ships to:
- Does not apply
High spec communication receiver which also supports digital reception.
● Wide range of reception from 10 kHz to 3.0 GHz
● Can receive digital waves (D-STAR (R), DCR, dPMR (R), NXDN (R), P25)
● Real time spectrum scope & waterfall equipment
● Remote control compatible
■ Covers a wide band of 10 kHz to 3 GHz including digital in various modes
Cover the wide reception range of 10 kHz to 3 GHz (excluding some frequency bands) with a minimum 1 Hz step. The radio model corresponds to USB / LSB, CW, FSK, AM, FM / WFM. It is a broadband receiver equipped with a function that can correspond not only to voice reception but also measurement of signal strength etc. It also supports reception of digital waves. It supports reception of dPMR (R), NXDN (R), P25 in addition to the digital communication method D - STAR (R) and digital simple - service radio (DCR) recommended by Japan Amateur Radio League.
■ All demodulation processing circuits are realized by software processing
FPGA (Field-Programmable Gate Array) + DSP is adopted as a demodulation processing circuit. In addition to demodulating using the RF direct sampling method, the HF band also converts analog signals converted to IF frequency 46.35 MHz to digital signals with a 14-bit A / D converter, and supports various reception modes by software processing. Moreover, by setting the sampling frequency of the A / D converter high as 122.88 MHz, it realizes a configuration which is advantageous for returning and image reception.
■ High level reception sensitivity and multi-signal characteristics are compatible
A bandpass filter divided into eleven in the front end of the HF band is adopted, and in the V / UHF band, a 13-band bandpass filter is adopted. While maintaining high sensitivity, it also achieves high multi-signal characteristics.
■ Large capacity memory (2000ch + 400ch)
A large capacity of 2000 ch is installed as a normal memory. In addition to the frequency, you can also store the tone, antenna setting (HF), PAMP, ATT, IP + in addition to the mode and tuning step. In each memory channel, you can write titles using Kanji with excellent visibility, and you can divide them into 100 groups for memory. In addition, 50 pairs 100 ch are prepared for program scan edge storage. Memory can also be registered from the PC with optional CS - R 8600.
■ Various scan functions
The scan speed achieves a maximum of 100 ch per second. It will be a powerful support to catch the target wave without missing it. In addition to having a variety of scan modes, scanning speed can also be set in 30 stages. Search efficiently and without leakage.
● Program Scan · · · Search for the range specified in advance.
● Memory scan · · · Search memory channels in order.
● Mode Select Memory Scan · · · Search only the channels that memorized the preset mode in the memory channel.
● Auto memory scan · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
● Select memory scan · · · Search only by specifying the memory channel you want to listen to.
● Priority Scan · · · · Check the presence or absence of a signal at a specific frequency while performing normal reception.
● ΔF Scan · · · Scanned constant span (frequency range) around display frequency.
■ Catch the target signal with high speed scope + water fall
High-resolution, high-speed real-time spectrum scope unique to digital processing is installed. Superior sweep speed of up to 30 screens / second (maximum), wide dynamic range (about 110 dB: at SPAN = ± 2.5 kHz), display range covering a wide range of up to ± 2.5 MHz, Powerful support. Moreover, it realized an intuitive operation that can move the frequency by touching the vicinity of the target signal. Of course, it is possible to refer to the scope while outputting the received sound. It also has a peak search function. In addition, by displaying waterfall, you can check the band status and the history of received signals in chronological order. The existence of a weak signal which is difficult to distinguish only by real-time spectrum scope can also be visualized.
■ Intuitive operation realizes smooth operation
In order to quickly and reliably capture radio waves to track, the user interface has also evolved. 4.3 inch color TFT liquid crystal is adopted as a display. By aggregating information on high-definition screens, smooth operation is realized. It corresponds to the touch operation, you can quickly and easily understand by touching the icon on the screen. In addition, we equipped three dials (DIAL A, B, C) that makes access to various items much faster, such as AF output level and squelch strength. When you press the dial, a menu will appear next to the dial. Touch the menu to select the item, and turn the dial to adjust the level.
■ Recorded content can be recorded, SD card slot installed
SD card slot for recording reception log and received voice on SD card. Compatible with SD cards up to 32GB, you can record 2GB (about 17 hours) per file. In addition, it is possible to capture the screen display at the time of reception by simple operation and save it to SD card as bmp / png format data.
■ Supports remote operation via LAN / USB
Remote control from PC and information can be acquired by LAN and USB. RS-R8600 (sold separately) is prepared as remote control software. By installing on Windows (R) PC, you can remotely control almost all major functions. Of course, real-time spectrum scope can also be confirmed via LAN, and even USB terminal * scope can be used.
※ 115200 bps
■ Equipped with I / Q output
Equipped with I / Q output terminal for digital output of IF input. It is possible to utilize such as controlling / analyzing the outputted signal with PC (It is installed at the firmware up at a later date, separately software etc may be necessary).
■ Other function group
● Equipped with three antenna terminals (0.01 to 30 MHz M type, pin jack / 0.01 to 3000 MHz N type)
● Absolute value display of electric field intensity
● Sleep timer function (5 to 120 minutes, in 5 minutes)
● Receive Attenuator
● Center indicator (FM / WFM / operating in each digital mode)
● AGC circuit mounted
● Digital AFC function
● Tone control (HPF / LPF, BASS / TREBLE, De-Emphasis)
● Noise Blanker - Circuit
● Speech function (Sun / English)
Main dial tension adjustment function
● Auto TS function
Main dial / panel lock function
● S-AM (AM synchronous detection mode)
● Various digital squelch function
Returns are accepted ONLY if the item was not the item described.
I ship it in Japan post EMS.
I attach the tracking number.
Please bid it without worrying
Shipping is only available to the address registered in Paypal.
Please note that any address not registered in Paypal is not acceptable to ship.
We accept PayPal only.
We will ship the item 10 business days after your payment clears.
As I have earned only a few feedbacks, you may be very worried to bid my auction. However,
I will provide courteous and responsive service.
If you are looking for a particular item that is not in my listing, please do not hesitate to contact
me. I will look it for you.
International Buyers - Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.